Material CB
Function: Other
Origin: Shenzhen
Product Category: Flying Tower
Electric or not: Yes
Power supply: Battery
Multifunctional or not: Yes
3C Configuration Category: Toys over 14 years old
Applicable age: Youth (15-35 years old)
40AminiF4 flying tower
Net weight of flying tower: 13.5g
Packing weight:56g
Packing size: 64*64*35mm
Flight control specifications
Flight control size: 29x29mm
Flight control net weight: 6g
Mounting hole spacing: 20 x 20mm x 4mm
Processor: STM32F405RET6
Gyroscope :ICM42688
BEC: 5V/2A; 10V/2A
Storage: 16MB
Input voltage: 2s-6s
Uart Serial ports: 5
Supports external programmable LED
Comes with 6P sky end seat
The RX2 connects to the SBUS
Electric modulation parameter
Electric modulation size: 31mm*29.5mm
Net weight: 6g
Fixed hole distance: 20mm*20mm*4mm
Continuous current: 40A
Maximum current: 45A (sustainable 10S)
Input voltage: 2S-6S
Current ratio: 300
Support electrical telemetry data map transmission
Reference software: BLHeliSuite32Activator 32.9.0.3
Driver signal support: PWM, Oneshot125, Oneshot42,Multishot, Dshot150, Dshot300,Dshot600
Parts list
M2 orange shock absorber x8, 8p wire x1, DJI6P connection cable x1, capacitor (35v270uf) x1, XT60 power source x1, red and blue power cord x1, (M2x25mm screw) x4, black nut x4, DJI 03 Air Unit three-in-one connection cable x1, manual x1
Product parameter
40AminiF4 V2 fly tower | |||||
Packing size | 64*64*35mm | ||||
Product net weight | 56g | ||||
Parts list:
M2 orange shock absorber ball x88p line x1 XT60 Power source x1 Red and blue power cord x1 DJI6P cable x1 capacitor (35v270uf)x1 (M2x25mm screw)x4 Black nut x4 DJI O3 Air Unit 3-in-1 Cable x1 Instructions x1 |
|||||
Flight control |
Electric control |
||||
Dimension | 29×29mm | Dimension | 31×29.5mm | ||
Net weight | 6g | Net weight | 6g | ||
Pitch of holes | 20*20mm | Pitch of holes | 20*20mm | ||
Processor | STM32F405RET6 | Sustained current | 40A | ||
Gyroscope | ICM42688 | Maximum current | 45A | ||
BEC | 5V/2.5A;10V/2A | Parameter tuning software |
BLHeliSuite32Activator_ |
||
Input voltage | 2-6S | Input voltage | 2-6S | ||
Storage | 16MB | Current ratio | 300 | ||
Firmware |
F405V2 |
Drive signal Support |
PWM,Oneshot125, 0ne- shot42,Multishot,
Dshot150, Dshot300, Dshot600 |
||
Uart serial port |
5 |
Firmware version | 40-K42_Multi_32_8.Hex |