32-bit 60A45A F722 DJI Fly tower 3-6S power modulation
Product Category: Other toy accessories
Processing customization: No
Toy category: electric toy
32-bit 60AF722 flying tower
Packing size :62*33mm
Net weight :40g
Flight control
Size :36*36mm
Net weight :6g
Hole distance :30.5×30.5mm*4mm
Processor :STM32F722RET6
Gyroscope :MPU6000/ICM20602 (one of two)
BEC:5V/3A; 9 v / 2.5 A
Input voltage :3-6S
Storage :16MB
Firmware 
betaflight__4.1.0_MATEK722se
Uart Serial port :5
Electric control
Size :45*42.5*6mm
Net weight :14.5g
Hole distance :30.5*30.5
Continuous current :60A
Maximum current :70A
Parameter tuning software :BLHeli 32
Input voltage :2–6S
Driver signal support 
shot150/300/600/1200, Multishot, PWM, Oneshot125,Oneshot42 and Multshot
Firmware version :BL32.7
Accessories list:
Purple ball *8,8P wire *1 DJI cable *1, large capacitor (35v470uf) *1,XT60 power source *1, red and black power cord *1 small screw *4, black nut *4
| 60AF722 flying tower | |||||
|
Packing dimension |
62*33mm | ||||
|
Product net weight |
40g | ||||
| Accessories list: Purple ball *8,8P wire *1 DJI cable *1, large capacitor (35v470uf) *1,XT60 power source *1, red and black power cord *1 small screw *4, black nut *4 | |||||
| Flight control | Electric control | ||||
| Dimension | 36x36mm | Dimension | 45*42.5*6mm | ||
| Net weight | 6g | Net weight | 14.5g | ||
| Pitch of holes | 30.5*30.5mm*4mm | Pitch of holes | 30.5mm*30.5mm | ||
| Processor | STM32F722RET6 | Sustained current | 60A | ||
| Gyroscope | MPU6000/ICM20602 (one of two) | Maximum current | 70A | ||
| BEC | 5V/3A; 9 V / 2.5 A | Parameter tuning software | BLHeliSuite32Activator_ | ||
| Input voltage | 3-6S | Input voltage | 2-8S | ||
| Storage | 16MB | Drive signal support | Dshot150/300/600/1200, Multishot, PWM, Oneshot125,Oneshot42 and Multshot | ||
| Firmware | betaflight__4.1.0_MATEK722se | Firmware version | BL32.7 | ||
| Uart Serial port | 5 | ||||
Products categories
-
Phone
-
E-mail
-
Whatsapp
-
Skype
-
Skype
-
Skype