一、 Product composition diagram
Specification parameter
Project | Parameter |
Communication mode | WIFI |
Unlocking mode | Face, fingerprint, password, CPU card, APP |
Operating voltage | DC 7.4V (Lithium battery) |
Standby supply voltage | USB 5V power supply |
Static power consumption | ≤130uA |
Dynamic power consumption | ≤2A |
Card reading distance | 0~10mm |
Cipher keyboard | Capacitive touch keyboard, 15 keys (0~9, #, *, doorbell, mute, lock) |
Key capacity | 100 faces, 200 passwords, 199 key cards, 100 fingerprints |
Voice-operated guidance | Bilingual in Chinese and English, full voice instructions |
Voice low battery alarm | support |
Display screen | Optional 0.96 inch OLED display |
Video cat eye components | Optional, audio and video intercom, 200W pixels, 3.97 “IPS display |
Voice anti-prying alarm | support |
Trial and error freezing | ≥5 times |
Rights management record | support |
Unlocking records the local storage capacity | Supports a maximum of 768 items |
Unlocking records are not lost after power failure | support |
Nethra coils | support |
ESD protection | Contact ±8KV, air ±15KV |
Strong magnetic field | > 0.5 T |
Strong electric field | >50V/m |
General function
Serial number | Function | Instructions |
1 | System management | In the initial state, the system does not have an administrator password. After power-on, press *# to set the management password. In the non-initial state, press *# to enter the administrator menu after successful verification. |
2 | Key management | Can store up to 100 faces, 200 passwords, 199 key cards, 100 fingerprints, password 6-14 bits (support up to 16 virtual bits) |
3 | APP function | Support mobile APP management and control |
5 | Normally open mode | After entering the menu, set it in system management, open the normally open mode, and the door lock will turn the main lock tongue and diagonal lock tongue. After any valid verification, the normally open mode will be turned off, and the lock will be automatically turned off. |
6 | System initialization | Hold down the initialization key 5s and enter the administrator password or enter the management menu to restore the system factory Settings. |
7 | Skid detection | After entering the menu, set it to open in system management, or set it to close (default). |
9 | Volume setting | After entering the menu, set the volume to high (default), Medium, Low, or Mute in system management. |
10 | Record query | A maximum of 756 event records can be read through the serial port. |
11 | Time setting | After entering the management menu, you can manually set the local time. |
12 | Trial and error alarm and lock | If the verification error occurs for three consecutive times within five minutes, the system displays an audible and visual prompt. If the verification error occurs for five consecutive times, the system freezes for 95 seconds except for the audible and visual prompt. |
13 | Low current alarm | When the battery voltage is lower than 6.8V, when the battery voltage is higher than 6.3V, wake up the rear door lock to indicate that the battery is low and can be unlocked normally. If the battery voltage is lower than 6.3V, it indicates that the battery is exhausted and cannot be locked. |
14 | Anti-skid alarm | When the door lock is opened for anti-skid detection, the switch is detected to pop off, or the switch is detected to pop off when waking up, and the door lock alarms. After legal verification, stop the alarm. |
15 | Emergency power supply | When the battery is low, an external power supply such as an external charging bank can be used to power the emergency door. |
16 | Network configuration | Network distribution and system management through designated APP. |
17 | Video cat eye | Support access, remote visual, video intercom, doorbell capture, stay alarm, etc. |