lComply with IEEE 802.11n, IEEE 802.11g/b, IEEE 802.3/3u standards
lWireless transmission rates up to 300Mbps
lTwo hundred gigabit Lans, switching between 1WAN and 1LAN in routing mode, both support automatic negotiation and automatic port flipping
lTransmit power up to 27dBm(Max) using two SKYWORKS SE2623s
lSupport the AP/Bridge/Station/Repeater, wireless Bridge relay, and other functions can be flexible used easily extend wireless network,
lSupports routing mode PPPoE, dynamic IP, static IP and other broadband access modes
lIt provides 64/128/152-bit WEP encryption and supports WPA/WPA-PSK and WPA2/WPA2-PSK security mechanisms
lThe built-in DHCP server can automatically and dynamically assign IP addresses
lAll Chinese configuration interface, support free software upgrade
1. Product description
AOK-AR934101 industrial-grade wireless AP motherboard, working in the 2.4GHz band using 802.11N technology 2×2 two-send and two-receive wireless architecture, supporting air rates up to 300Mbps compatible with 802.11b/g/n protocol, Using OFDM modulation and MINO technology, the network structure supporting point-to-point (PTP) and point-to-multipoint (PTMP) connects local area networks distributed in different locations and different buildings. It is a wireless AP motherboard that truly realizes high performance, high bandwidth and multi-function platform. Mainly used in the field of industrial control intelligence, mining communication coverage, automated interconnection, robots, drones and so on.
Hardware configuration | |
Product Model | AOK-AR934101 Wireless AP board |
Master control | Atheros AR9341 |
Dominant frequency | 580MHz |
Wireless technology | 802.11b/g/ n2T2R 300M MIMO technology |
Memory | 64MB DDR2 RAM |
Flash | 8MB |
Device interface | 2 piece of 10/100Mbps adaptive RJ45 network interfaces, can be switched to 1WAN, 1LAN |
Antenna interface | 2 piece of IPEX seat son output |
Dimension | 110*85*18mm |
Power Supply | DC :12 to 24V 1aPOE:802.3at 12 to 24V 1a |
Power dissipation | Standby: 2.4W; Start: 3W; Peak value: 6W |
Radio-frequency parameter | |
Radio-frequency characteristic | 802.11b/g/n 2.4 to 2.483GHz |
Modulation mode | OFDM = BPSK,QPSK, 16-QAM, 64-QAM |
DSSS = DBPSK, DQPSK, CCK | |
Transmission speed | 300Mbps |
Receiving sensitivity | -95dBm |
Transmit power | 27dBm(500mW) |
Software feature | |
Working mode | Transparent Bridge: Bridge-AP, bridge-station, bridge-repeater; |
Routing modes: Router-AP, Router-Station, Router-Repeater; | |
Communication standard | IEEE 802.3(Ethernet) |
IEEE 802.3u(Fast Ethernet) | |
IEEE 802.11b/g/n(2.4G WLAN) | |
Wireless Settings | Supports multiple SSIDs, up to 3 (supports Chinese SSIDs) |
Distance control 802.1x ACK time output | |
Security policy | WEP security Support 64/128/152-bit WEP security passwords |
WPA/WPA2 security mechanism (WPA-PSK uses TKIP or AES) | |
WPA/WPA2 security mechanism (WPA-EAP uses TKIP) | |
System configuration | WEB page configuration |
System diagnosis | Automatically detects the network status, automatically connects to the network after disconnection, supports the Pingdog function |
Software upgrade | WEB page or Uboot |
User management | Support client isolation, blacklist and whitelist |
System monitoring | client connection status, signal strength, connection rate |
Log | Provides local logs |
Restore Settings | Hardware Reset key restore, software restore |
Physical characteristics | |
Temperature characteristics | Ambient temperature: -40°C to 75°C |
Operating temperature: 0°C to 55°C | |
Humidity | 5%~95% (typical) |
Comply with IEEE 802.3, IEEE 802.3U, IEEE 802.3AB standards;
Full duplex adopts IEEE 802.3x standard, half duplex adopts Back pressure standard;
Four 10/100M adaptive pin network ports supporting automatic port flipping (Auto MDI/MDIX) Each port supports automatic negotiation and automatically adjusts the transfer mode and transfer rate.
Support MAC address self-learning;
Support full speed forward non-blocking communication;
Mini size design, 38X38MM(L X W);
Dynamic LED indicator to provide simple working status warning and troubleshooting;
Power supply support 9-12V input;
I. Product overview
AOK-S10401 is a four-port mini non-managed Ethernet switch core module, providing four 10/100M adaptive Ethernet ports, 38*38mm mini design size, easy to install, adapt to different embedded system integration.
Interface terminal:
1. The network port uses 4p 1.25mm socket
2, the power supply adopts 2p 1.25mm socket
2.Interface definition
Hardware characteristics | |
Product name | 4-port 100 Mbit/s Ethernet switch module |
Product model | AOK-S10401 |
Port description | Network port: 4-pin 1.25mm pin terminalPower supply: 2Pin 1.25mm pin terminal |
Network protocol | Standards: IEEE802.3, IEEE802.3U, IEEE802.3XFlow control: IEEE802.3x. Back Pressure |
Network port | 100 Mbit/s network port: 10Base-T/100Base-TX adaptive |
Handover performance | 100 Mbit/s forwarding speed: 148810ppsTransmission mode: Store and forward
System switching broadband: 1.0G Cache size: 1.0G MAC address: 1K |
LED indicator light | Power indicator: PWRInterface indicator: Data indicator (Link/ACT) |
Power supply | Input voltage: 12VDC (5~12VDC)Input method: Pin type 2P terminal, spacing 1.25MM |
Power dissipation | No load: 0.9W@12VDCThe load 2W@VDC |
Temperature Characteristic | Ambient temperature: -10°C to 55°C |
Operating temperature: 10°C~55°C | |
Product structure | Weight: 10g |
Standard size: 38*38*7mm (L x W x H) |
Product characteristics
Support the IEEE802.3, 802.3 U and 802.3 ab, 802.3 x standard
Supports four 10Base-T/100Base-T(X)/1000Base-T(X) Gigabit Ethernet pin network ports
Support full/half duplex mode, MDI/MDI-X automatic detection
Supports full-speed forward non-blocking communication
Supports 5-12VDC power input
Size design Mini, 38x38mm
Capacitors Industrial solid state capacitors
1. Product description
AOK-S10403 is a non-managed commercial Ethernet switch core module, supporting four gigabit Ethernet ports, Ethernet ports adopt the socket mode, design 38×38 mini size, suitable for different scenarios embedded development integration, support one DC 5-12VDC power input. It also supports four 12V outputs.
Product application scenarios:
This product is embedded integrated module, used in conference room system, education system, security system, industrial computer, robot, gateway and so on.
Hardware characteristics | |
Product name | 4-port Gigabit Ethernet switch module |
Product model | AOK-S10403 |
Port description | Network interface: 8Pin 1.25mm pin terminalPower input: 2Pin 2.0mm pin terminalPower output: 2Pin 1.25mm pin terminal |
Network protocol | Standards: IEEE802.3, IEEE802.3U, IEEE802.3XFlow control: IEEE802.3x. Back Pressure |
Network port | Gigabit network port: 10Base-T/100Base-TX/1000Base-Tx adaptive |
Handover performance | 100 Mbit/s forwarding speed: 148810ppsGigabit forwarding speed: 1,488,100 PPSTransmission mode: Store and forward
System switching broadband: 10G Cache size: 1M MAC address: 1K |
LED indicator light | Power indicator: PWRInterface indicator: Data indicator (Link/ACT) |
Power supply | Input voltage: 12VDC (5~12VDC)Input method: Pin type 2P terminal, spacing 1.25MM |
Power dissipation | No load: 0.9W@12VDCThe load 2W@VDC |
Temperature characteristic | Ambient temperature: -10°C to 55°C |
Operating temperature: 10°C~55°C | |
Product structure | Weight: 12g |
Standard size: 38*38*13mm (L x W x H) |
2. Interface definition
Comply with IEE802.3, IEEE 802.3u, IEE 802.3ab standards;
Full duplex adopts IEE 802.3x standard, half duplex adopts Backpressure standard;
Five 10/100M adaptive network ports supporting automatic port flipping (Auto MDI/MDIX) Each port supports automatic negotiation and automatically adjusts the transfer mode and transfer rate.
Support MAC address self-learning;
Dynamic LED indicator to provide simple working status warning and troubleshooting;
Lightning surge machine electrostatic protection; Electrostatic support contact 4KV, surge differential mode 2KV, common mode 4KV redundant dual DC power input overload protection;
Power supply supports 6-12V input
I. Product description:
AOK-IES100501 is a five-port mini non-network management industrial Ethernet switch core module, providing five 10/100M adaptive Ethernet ports, providing DC input positive and reverse connection protection against burn products, compact design, easy installation, power network port support ESD surge protection level.
Hardware characteristics | |
Product name | Industrial 5 port 100 Mbit embedded switch module |
Product model | AOK-IES100501 |
Port description | Network port: 4-pin 1.25mm pin terminalNetwork port: 4-pin 1.25mm pin terminal |
Network protocol | IEEE802.310BASE-TIEEE802.3i 10Base-TIEEE802.3u;100Base-TX/FXIEEE802. 3ab1000Base-T
IEEE802.3z1000Base-X IEEE802.3x |
Network port | 10/100BaseT (X) Automatic detection, full half-duplex MDIMDI-X adaptive |
Switch performance | 100 Mbit/s forwarding speed: 148810ppsTransmission mode: Store and forwardSystem switching broadband: 1.0G
Cache size: 1.0G MAC address: 1K |
Industry standard | EMI: FCC Part 15 Subpart B Class A, EN 55022 Class AEMS:EC(EN) 61000-4-2 (ESD):+4KV contact discharge :+8KV air dischargeIEC(EN)61000-4-3(RS): 10V/m(80~ 1000MHz)
IEC(EN)61000-4-4(EFT): Power cables :+4KV; Data cable :+2KV IEC(EN)61000-4 -5(Surge): Power cable :+4KV CM/+2KV DM; Data cable: +2KV IEC(EN)61000-4-6(RF-conduction):3V(10kHz~150kHz),10V(150kHz~80MHz) IEC(EN) 61000-4-16 (common mode conduction):30V cont.300V,1s IEC(EN )61000-4-8 Shock: IEC 60068-2-27 Freefall: IEC 60068-2-32 Vibration: IEC 60068-26 |
Power supply | Input voltage: 6-12 VDC Reverse protection is supported |
LED indicator light | Power indicator: PWRInterface indicator: Data indicator (Link/ACT) |
Dimension | 62*39*10mm (L x W x H) |
Standards and certification | Standard industrial grade |
Quality guarantee | Five years |
2. Interface definition