Products
-
MX-6924 F5 Qualcomm QCN9024/5GHz/4×4 MIMO/PCI Express 3.0/802.11ax/WiFi6 module
OTOMO MX6924 F5 is an embedded wireless network card that uses M.2 E-key interface and supports PCI Express 3.0 protocol. Using Qualcomm® 802.11ax Wi-Fi technology, support 5180-5850 GHZ band, with AP and STA capabilities, 4×4 MIMO and 4 spatial streams.
-
Domestic spread spectrum anti-interference low cost serial port 433M wireless communication module Lora remote UART AD hoc network
Functional characteristics:
Communication frequency :380M~550M
Power supply voltage: 3~6V
Transmission power: 20DBM(100MW)
Communication interface: UART
Receiving sensitivity: -140DBM
Interface: SMD (compatible with 2.0 row pins)
Modulation mode: CHIRP-IOT
Module size: 15.4* 30.1MM
Supports remote wireless configuration parameters
Support for sending data at a fixed point (string)
-
MX – 6974 F5 qualcomm QCN9074/4 x4 MIMO / 5 GHZ/PCI Express3.0/802.11 ax/WIFI6 module
OTOMO MX6974 F5 is an embedded WiFi6 wireless card with a PCI Express 3.0 interface and M.2 E-key. The wireless card uses Qualcomm® 802.11ax Wi-Fi 6 technology, supports the 5180-5850 GHZ band, and can perform AP and STA functions.
-
MX520VX Qualcomm QCA9880&QCA9882/2*2 MIMO/Mini PCI Express/2.4GHz&5GHz/ 802.11ac/WiFi module
OTOMO MX520VX wireless WIFI network card, using Qualcomm QCA9880/QCA9882 chip, dual-frequency wireless access design, host interface for Mini PCIExpress 1.1, 2×2 MIMO technology, speed up to 867Mbps. Compatible with IEEE 802.11ac and backward compatible with 802.11a/b/g/n/ac.
-
Original Arduino NANO RP2040 ABX00053 Bluetooth WiFi development board RP2040 chip
Based on Raspberry PI RP2040
Dual-core 32-bit Arm*Cortex” -M0 +
Local Bluetooth, WiFi,U-blox Nina W102
Accelerometer, gyroscope
ST LSM6DSOX 6-axis IMU
Encryption protocol processing (Microchip ATECC608A)
Built-in buck converter (high efficiency, low noise)
Support Arduino IDE, support MicroPython
-
Original Arduino MKR WAN 1300 ABX00017 Dipole Antenna GSM X000016
Main feature
Broadband Size: 130x16x5 mm Easy to install
Cable length: 120 mm/4.75 inches RoHs compliant
Cable type: Micro coaxial cable 1.13 Good efficiency
Connector: Miniature UFL Connector: Miniature UFL
Operating temperature: -40/85℃ Support double-sided tape
Ipx-MHF -
Arduino PORTENTA H7 ABX00042 development board STM32H747 dual-core WIFI Bluetooth
Italy Original development board
Programming in high-level languages and artificial intelligence while performing low-latency operations on customizable hardware
Two parallel cores
The Portenta H7 main processor is a dual-core unit consisting of a Cortex⑧M7 running at 480 and a Cortex⑧M4 running at 240 MHz. The two cores communicate through a remote procedure call mechanism that allows seamless calls to functions on the other processor
Graphics accelerator
Portenta H7 can connect external monitors to build your own dedicated embedded computer and user interface. It’s all thanks to the GPUChrom-ART Accelerator on the processor. In addition to the GPU, the chip also includes a dedicated JPEG encoder and decoder
-
Original Arduino UNO R4 WIFI/Minima motherboard ABX00087/80 imported from Italy
Arduino UNO R4 Minima This on-board Renesas RA4M1 microprocessor offers increased processing power, expanded memory, and additional peripherals. Embedded 48 MHz Arm⑧Cortex⑧ M4 microprocessor. The UNO R4 has more memory than the UNO R3, with 256kB of flash memory, 32kB of SRAM, and 8kB of data memory (EEPROM).
The ArduinoUNO R4 WiFi combines the Renesas RA4M1 with the ESP32-S3 to create an all-in-one tool for makers with enhanced processing power and a variety of new peripherals. The UNO R4 WiFi enables makers to venture into unlimited creative possibilities.
-
Original Arduino MKR Zero development board ABX00012 Music/Digital audio I2S/SD bus
The Arduino MKR ZERO is powered by Atmel’s SAMD21 MCU, which has a 32-bit ARMR CortexR M0+ core
MKR ZERO brings you the power of zero in a smaller format built in the MKR form factor The MKR ZERO board is an educational tool for learning 32-bit application development
Simply connect it to a computer using a micro-USB cable or power it through a lithium polymer battery. Since there is a connection between the analog converter of the battery and the circuit board, the battery voltage can also be monitored.
Main features:
1. Small size
2. Number crunching ability
3. Low power consumption
4. Integrated battery management
5. USB host
6. Integrated SD management
7. Programmable SPI, I2C and UART
-
Italy original Arduino Leonardo development board A000052/57 microcontroller ATmega32u4
ATmega32U4
High-performance, low-power AVR 8-bit microcontroller.
Built-in USB communication
The ATmega32U4 has a built-in USB communication feature that allows the Micro to appear as a mouse/keyboard on your machine.
Battery connector
The Arduino Leonardo features a barrel plug connector that is ideal for use with standard 9V batteries.
EEPROM
The ATmega32U4 has a 1kb EEPROM that is not erased in the event of power failure.
-
Smart Door semi-automatic lock plate kit
一、 Specification parameters
Item Argument Communication mode WiFi, Bluetooth Unlocking mode Fingerprint, password, CPU card, M1 card Operating voltage DC 6V (4 1.5V alkaline batteries) Standby supply voltage USB 5V power supply Static-power-consumption ≤60uA Dynamic-power-consumption ≤350mA Card reading distance 0~15mm Cipher keyboard Capacitive touch keyboard, 14 keys (0~9, #, *, doorbell, mute) Display screen OLED (optional) Key capacity 100 codes, 100 key cards, 100 fingerprints Fingerprint sensor type Semiconductor capacitive Fingerprint resolution 508DPI Induction array 160*160 pixel Voice-operated guidance support Voice low battery alarm support Voice anti-prying alarm support Trial and error freezing ≥5 times Rights-management record support Unlocking records the local storage capacity Supports a maximum of 1000 files -
Door lock automatic lock plate kit
Specification parameter
Project Parameter Communication mode WIFI Unlocking mode Face, fingerprint, password, CPU card, APP Operating voltage DC 7.4V (Lithium battery) Standby supply voltage USB 5V power supply Static power consumption ≤130uA Dynamic power consumption ≤2A Card reading distance 0~10mm Cipher keyboard Capacitive touch keyboard, 15 keys (0~9, #, *, doorbell, mute, lock) Key capacity 100 faces, 200 passwords, 199 key cards, 100 fingerprints Voice-operated guidance Bilingual in Chinese and English, full voice instructions Voice low battery alarm support Display screen Optional 0.96 inch OLED display Video cat eye components Optional, audio and video intercom, 200W pixels, 3.97 “IPS display Voice anti-prying alarm support Trial and error freezing ≥5 times Rights management record support Unlocking records the local storage capacity Supports a maximum of 768 items Unlocking records are not lost after power failure support Nethra coils support ESD protection Contact ±8KV, air ±15KV Strong magnetic field > 0.5 T Strong electric field >50V/m
-
Phone
-
E-mail
-
Whatsapp
-
Skype
-
Skype
-
Skype