Product model :LM2596S DC-DC buck module
Input voltage :3.2V~46V (recommended for use within 40V)
Output voltage :1.25V~35V
Output current :3A (large)
Conversion efficiency :92% (high)
Output ripple :<30mV
Switching frequency :65KHz
Operating temperature :-45°C~ +85°C
Size :43mm * 21mm * 14mm
Using the AD620 as the main amplifier, it can amplify microvolts and millivolts. Magnification 1.5-10000 times, adjustable. High precision, low misalignment, better linearity. Adjustable zero to improve accuracy. Can be used for AC, DC model amplification.
Product name: HIF| Step filter 2x50W Bluetooth digital power amplifier board
Product model: ZK-502C
Chip scheme: TPA3116D2 (with AM interference suppression function)
Filter or not: Yes (the sound is more round and clear after filtering)
Adaptive power supply voltage: 5~27V (optional 9V/12V/15V18V/24V adapter, high power recommended high voltage)
Adaptive horn: 30W~200W, 402, 802Ω
Number of channels: Left and right (stereo)
Bluetooth version: 5.0
Bluetooth transmission distance: 15m (no occlusion)
Protection mechanism: over voltage, under voltage, overheating, DC detection, short circuit protection
AT instruction set
HC-05 embedded Bluetooth serial communication module (hereinafter referred to as module) has two working modes: command response work
Mode and automatic connection mode, in the automatic connection mode module can be divided into Master (Master), Slave (Slave)
And Loopback (Loopback) three job roles. When the module is in automatic connection mode, it will automatically be set according to the prior setting
The mode of connection for data transmission; When the module is in command response mode, all the following AT commands can be executed
Send various AT instructions to the module, set control parameters for the module or issue control commands. External pins through the control module
(PIO11) input level, which can realize dynamic conversion of module working state.
YD-ESP32-S3 WIFI+BLE5.0 development core board
Use the original Le Xin
ESP32-S3-WROOM-1-N16R8 module
N16R8 (16M external flash/8M PSRAM)/AI IOT/ dual Type-C USB port /W2812 rgb/ high-speed USB-to-serial port
32-bit low-power dual-core CPU for application processors up to 240 MHz main frequency 600DMPS of computing power built in 520 kb SRAM, 4 meters external psram support UART/SPI /I2C/ PWM/ADC1 DAC interface support ov 2640 and oV 767 cameras, Built-in flash wifi image support upmovement TF card Support multi-mode support Pink Iwip and freedos integrated sta/ AP/ sta + AP operation mode Support Support point-and-click intelligent distribution network config/ air kiss Support secondary development Package list: One esp 32 camera development board with ov 2640 camera module
Product name: CMSIS DAP Simulator
Debugging interface: JTAG,SWD, virtual serial port
Development environment: Kei1/MDK, IAR, OpenOCD
Target chips: All chips based on the Cortex-M core, such as STM32, NRF51/52, etc
Operating system: Windows, Linux, Mac
Input voltage: 5V (USB power supply)
Output voltage :5V/3.3V(can be directly supplied to the target board)
Product size: 71.5mm*23.6mm*14.2mm
Input voltage :0.5-30V
Output current: It can work stably in 3A for a long time, and can reach 4A under enhanced heat dissipation
Output power: natural heat dissipation 35W, enhanced heat dissipation 60W
Conversion efficiency: about 88%
Short circuit protection: Yes
Operating frequency :180KHZ
Size: Length * width * height 65*32* 21mm
Product weight :30g
AUX+ Bluetooth input 2-in-1 HIFI level with filter 2x100W Bluetooth digital power amplifier board