Wireless module
-
ESP32 S3 Core board Onboard WROOM-1-N16R8 ESP32-S3-DEVKITC-1 module
YD-ESP32-S3 WIFI+BLE5.0 development core board
Use the original Le Xin
ESP32-S3-WROOM-1-N16R8 module
N16R8 (16M external flash/8M PSRAM)/AI IOT/ dual Type-C USB port /W2812 rgb/ high-speed USB-to-serial port
-
ESP32 CAM development board with OV2640 module WIFI+ Bluetooth module
32-bit low-power dual-core CPU for application processors up to 240 MHz main frequency 600DMPS of computing power built in 520 kb SRAM, 4 meters external psram support UART/SPI /I2C/ PWM/ADC1 DAC interface support ov 2640 and oV 767 cameras, Built-in flash wifi image support upmovement TF card Support multi-mode support Pink Iwip and freedos integrated sta/ AP/ sta + AP operation mode Support Support point-and-click intelligent distribution network config/ air kiss Support secondary development Package list: One esp 32 camera development board with ov 2640 camera module
-
DIY Bluetooth 5.1 Audio receiver module MP3 Bluetooth decoding Board car speaker Audio amplifier Board 4.1
Product information Product name :MP3 Bluetooth decoding board Product Model :VHM-314 USB power supply: Universal Micro USB 5V power supply Power supply :3.7-5V SNR :90db THD+N:-70db Crosstalk :-86db DNR:91db Supported configuration :A2 DP/AVCTP/AVDTP/HFP Service level :>5 meters Product weight :3.1g Product description Interface details: USB power supply Universal Micro USB 5V power supply 3.7-5V power supply pad External 3.7-5V lithium battery power supply modification LED indicator Blu... -
DC-DC high-power booster module 600W constant voltage constant current vehicle voltage regulated solar charging 12-80V
Module parameters: Module name: 600W booster constant current module Module Properties: Non-isolated BOOST Module (BOOST) Input voltage: Two input voltage ranges are optional (selected by jumper on the board) 1, 8-16V input (for three series of lithium and 12V battery applications) In this input state, do not overvoltage input, otherwise it will burn the module!! 2, 12-60V input factory default range (for wide input voltage range applications) Input current: 16A (MAX) More than 10A please str... -
DAPLINK replaces the JLINK OBSTLINK STM32 burner down-loader emulator ARM
Product name: CMSIS DAP Simulator
Debugging interface: JTAG,SWD, virtual serial port
Development environment: Kei1/MDK, IAR, OpenOCD
Target chips: All chips based on the Cortex-M core, such as STM32, NRF51/52, etc
Operating system: Windows, Linux, Mac
Input voltage: 5V (USB power supply)
Output voltage :5V/3.3V(can be directly supplied to the target board)
Product size: 71.5mm*23.6mm*14.2mm
-
Constant voltage and constant current adjustable automatic booster power module Booster module Solar charging 4A
Input voltage :0.5-30V
Output current: It can work stably in 3A for a long time, and can reach 4A under enhanced heat dissipation
Output power: natural heat dissipation 35W, enhanced heat dissipation 60W
Conversion efficiency: about 88%
Short circuit protection: Yes
Operating frequency :180KHZ
Size: Length * width * height 65*32* 21mm
Product weight :30g -
100WX2 HIFI Fever high fidelity High power 2.0 stereo Bluetooth digital power amplifier board TPA3116
AUX+ Bluetooth input 2-in-1 HIFI level with filter 2x100W Bluetooth digital power amplifier board
-
AOK-AR934101 Industrial grade wireless AP motherboard
lComply with IEEE 802.11n, IEEE 802.11g/b, IEEE 802.3/3u standards
lWireless transmission rates up to 300Mbps
lTwo hundred gigabit Lans, switching between 1WAN and 1LAN in routing mode, both support automatic negotiation and automatic port flipping
lTransmit power up to 27dBm(Max) using two SKYWORKS SE2623s
lSupport the AP/Bridge/Station/Repeater, wireless Bridge relay, and other functions can be flexible used easily extend wireless network,
lSupports routing mode PPPoE, dynamic IP, static IP and other broadband access modes
lIt provides 64/128/152-bit WEP encryption and supports WPA/WPA-PSK and WPA2/WPA2-PSK security mechanisms
lThe built-in DHCP server can automatically and dynamically assign IP addresses
lAll Chinese configuration interface, support free software upgrade
1. Product description
AOK-AR934101 industrial-grade wireless AP motherboard, working in the 2.4GHz band using 802.11N technology 2×2 two-send and two-receive wireless architecture, supporting air rates up to 300Mbps compatible with 802.11b/g/n protocol, Using OFDM modulation and MINO technology, the network structure supporting point-to-point (PTP) and point-to-multipoint (PTMP) connects local area networks distributed in different locations and different buildings. It is a wireless AP motherboard that truly realizes high performance, high bandwidth and multi-function platform. Mainly used in the field of industrial control intelligence, mining communication coverage, automated interconnection, robots, drones and so on.Hardware configuration Product Model AOK-AR934101 Wireless AP board Master control Atheros AR9341 Dominant frequency 580MHz Wireless technology 802.11b/g/ n2T2R 300M MIMO technology Memory 64MB DDR2 RAM Flash 8MB Device interface 2 piece of 10/100Mbps adaptive RJ45 network interfaces, can be switched to 1WAN, 1LAN Antenna interface 2 piece of IPEX seat son output Dimension 110*85*18mm Power Supply DC :12 to 24V 1aPOE:802.3at 12 to 24V 1a Power dissipation Standby: 2.4W; Start: 3W; Peak value: 6W Radio-frequency parameter Radio-frequency characteristic 802.11b/g/n 2.4 to 2.483GHz Modulation mode OFDM = BPSK,QPSK, 16-QAM, 64-QAM DSSS = DBPSK, DQPSK, CCK Transmission speed 300Mbps Receiving sensitivity -95dBm Transmit power 27dBm(500mW) Software feature Working mode Transparent Bridge: Bridge-AP, bridge-station, bridge-repeater; Routing modes: Router-AP, Router-Station, Router-Repeater; Communication standard IEEE 802.3(Ethernet) IEEE 802.3u(Fast Ethernet) IEEE 802.11b/g/n(2.4G WLAN) Wireless Settings Supports multiple SSIDs, up to 3 (supports Chinese SSIDs) Distance control 802.1x ACK time output Security policy WEP security Support 64/128/152-bit WEP security passwords WPA/WPA2 security mechanism (WPA-PSK uses TKIP or AES) WPA/WPA2 security mechanism (WPA-EAP uses TKIP) System configuration WEB page configuration System diagnosis Automatically detects the network status, automatically connects to the network after disconnection, supports the Pingdog function Software upgrade WEB page or Uboot User management Support client isolation, blacklist and whitelist System monitoring client connection status, signal strength, connection rate Log Provides local logs Restore Settings Hardware Reset key restore, software restore Physical characteristics Temperature characteristics Ambient temperature: -40°C to 75°C Operating temperature: 0°C to 55°C Humidity 5%~95% (typical) -
Four-port mini non-managed Ethernet switch core module AOK-S10401
Comply with IEEE 802.3, IEEE 802.3U, IEEE 802.3AB standards;
Full duplex adopts IEEE 802.3x standard, half duplex adopts Back pressure standard;
Four 10/100M adaptive pin network ports supporting automatic port flipping (Auto MDI/MDIX) Each port supports automatic negotiation and automatically adjusts the transfer mode and transfer rate.
Support MAC address self-learning;
Support full speed forward non-blocking communication;
Mini size design, 38X38MM(L X W);
Dynamic LED indicator to provide simple working status warning and troubleshooting;
Power supply support 9-12V input;
I. Product overview
AOK-S10401 is a four-port mini non-managed Ethernet switch core module, providing four 10/100M adaptive Ethernet ports, 38*38mm mini design size, easy to install, adapt to different embedded system integration.
Interface terminal:
1. The network port uses 4p 1.25mm socket
2, the power supply adopts 2p 1.25mm socket
2.Interface definition
Hardware characteristics Product name 4-port 100 Mbit/s Ethernet switch module Product model AOK-S10401 Port description Network port: 4-pin 1.25mm pin terminalPower supply: 2Pin 1.25mm pin terminal Network protocol Standards: IEEE802.3, IEEE802.3U, IEEE802.3XFlow control: IEEE802.3x. Back Pressure Network port 100 Mbit/s network port: 10Base-T/100Base-TX adaptive Handover performance 100 Mbit/s forwarding speed: 148810ppsTransmission mode: Store and forward System switching broadband: 1.0G
Cache size: 1.0G
MAC address: 1K
LED indicator light Power indicator: PWRInterface indicator: Data indicator (Link/ACT) Power supply Input voltage: 12VDC (5~12VDC)Input method: Pin type 2P terminal, spacing 1.25MM Power dissipation No load: 0.9W@12VDCThe load 2W@VDC Temperature Characteristic Ambient temperature: -10°C to 55°C Operating temperature: 10°C~55°C Product structure Weight: 10g Standard size: 38*38*7mm (L x W x H) -
Non-managed commercial Ethernet switch core module AOK-S10403
Product characteristics
Support the IEEE802.3, 802.3 U and 802.3 ab, 802.3 x standard
Supports four 10Base-T/100Base-T(X)/1000Base-T(X) Gigabit Ethernet pin network ports
Support full/half duplex mode, MDI/MDI-X automatic detection
Supports full-speed forward non-blocking communication
Supports 5-12VDC power input
Size design Mini, 38x38mm
Capacitors Industrial solid state capacitors
1. Product description
AOK-S10403 is a non-managed commercial Ethernet switch core module, supporting four gigabit Ethernet ports, Ethernet ports adopt the socket mode, design 38×38 mini size, suitable for different scenarios embedded development integration, support one DC 5-12VDC power input. It also supports four 12V outputs.
Product application scenarios:
This product is embedded integrated module, used in conference room system, education system, security system, industrial computer, robot, gateway and so on.
Hardware characteristics Product name 4-port Gigabit Ethernet switch module Product model AOK-S10403 Port description Network interface: 8Pin 1.25mm pin terminalPower input: 2Pin 2.0mm pin terminalPower output: 2Pin 1.25mm pin terminal Network protocol Standards: IEEE802.3, IEEE802.3U, IEEE802.3XFlow control: IEEE802.3x. Back Pressure Network port Gigabit network port: 10Base-T/100Base-TX/1000Base-Tx adaptive Handover performance 100 Mbit/s forwarding speed: 148810ppsGigabit forwarding speed: 1,488,100 PPSTransmission mode: Store and forward System switching broadband: 10G
Cache size: 1M
MAC address: 1K
LED indicator light Power indicator: PWRInterface indicator: Data indicator (Link/ACT) Power supply Input voltage: 12VDC (5~12VDC)Input method: Pin type 2P terminal, spacing 1.25MM Power dissipation No load: 0.9W@12VDCThe load 2W@VDC Temperature characteristic Ambient temperature: -10°C to 55°C Operating temperature: 10°C~55°C Product structure Weight: 12g Standard size: 38*38*13mm (L x W x H) 2. Interface definition
-
AOK-IES100501 five-port mini non-network management industrial Ethernet switch core module
Comply with IEE802.3, IEEE 802.3u, IEE 802.3ab standards;
Full duplex adopts IEE 802.3x standard, half duplex adopts Backpressure standard;
Five 10/100M adaptive network ports supporting automatic port flipping (Auto MDI/MDIX) Each port supports automatic negotiation and automatically adjusts the transfer mode and transfer rate.
Support MAC address self-learning;
Dynamic LED indicator to provide simple working status warning and troubleshooting;
Lightning surge machine electrostatic protection; Electrostatic support contact 4KV, surge differential mode 2KV, common mode 4KV redundant dual DC power input overload protection;
Power supply supports 6-12V input
I. Product description:
AOK-IES100501 is a five-port mini non-network management industrial Ethernet switch core module, providing five 10/100M adaptive Ethernet ports, providing DC input positive and reverse connection protection against burn products, compact design, easy installation, power network port support ESD surge protection level.
Hardware characteristics Product name Industrial 5 port 100 Mbit embedded switch module Product model AOK-IES100501 Port description Network port: 4-pin 1.25mm pin terminalNetwork port: 4-pin 1.25mm pin terminal Network protocol IEEE802.310BASE-TIEEE802.3i 10Base-TIEEE802.3u;100Base-TX/FXIEEE802. 3ab1000Base-T IEEE802.3z1000Base-X
IEEE802.3x
Network port 10/100BaseT (X) Automatic detection, full half-duplex MDIMDI-X adaptive Switch performance 100 Mbit/s forwarding speed: 148810ppsTransmission mode: Store and forwardSystem switching broadband: 1.0G Cache size: 1.0G
MAC address: 1K
Industry standard EMI: FCC Part 15 Subpart B Class A, EN 55022 Class AEMS:EC(EN) 61000-4-2 (ESD):+4KV contact discharge :+8KV air dischargeIEC(EN)61000-4-3(RS): 10V/m(80~ 1000MHz) IEC(EN)61000-4-4(EFT): Power cables :+4KV; Data cable :+2KV
IEC(EN)61000-4 -5(Surge): Power cable :+4KV CM/+2KV DM; Data cable: +2KV
IEC(EN)61000-4-6(RF-conduction):3V(10kHz~150kHz),10V(150kHz~80MHz)
IEC(EN) 61000-4-16 (common mode conduction):30V cont.300V,1s
IEC(EN )61000-4-8
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-26
Power supply Input voltage: 6-12 VDC Reverse protection is supported LED indicator light Power indicator: PWRInterface indicator: Data indicator (Link/ACT) Dimension 62*39*10mm (L x W x H) Standards and certification Standard industrial grade Quality guarantee Five years 2. Interface definition
-
WLE1216V5-23 5GHZ 4×4 802.11ac high-power MINI-PCIE wireless network card
Product characteristics
Qualcomm-Atheros QCA9980
Qualcomm Atheros ‘Cascade’ QCA9984
CUS239 reference design
5GHz Max 23dBm output power (per channel)
Compatible with IEEE 802.11ac & and backward compatible with 802.11a/n
Up to 1.73Gbps data transfer speed
2 spatial streams (2SS), supporting MIMO 160MHz and 80+80MHz bandwidth
4 Space Streams (4SS) Multi-user MIMO (MU-MIMO)
802.11ac has explicit emission velocity formation (TxBF) and traditional implicit emission velocity formation of TxBF
MiniPCI Express 2.0 interface
Supports spatial multiplexing, cyclic delay Diversity (CDD), Low density parity check (LDPC) Codes, Maximum ratio Merge (MRC), space-time Block Code (STBC)
Support IEEE 802.11d, e, h, i, j, k, r, u, v time stamp, w and z standards
Supports dynamic frequency selection (DFS)
Designed for high bandwidth enterprise aps
-
Phone
-
E-mail
-
Whatsapp
-
Skype
-
Skype
-
Skype